Digital Dual Power Amplifier
The DA-1250D is a 2-Channel Digital Amplifier featuring lightweight, compact and high power output. It delivers 1250W x 2 channels (4Ω output). It can be mounted in an EIA standard equipment rack (2 unit size).
• Dual Channel Digital Power Amplifier
• High power - total output of 2500 W (4Ω) in a 2U cabinet
• Selectable connection cases - Bridge mode/Parallel mode/Stereo mode
• Bridgeable for 1-channel operation
How can I turn, enlarge, move the object?
Rotate /Turn: Hold left click and drag at the same time or on a touch screen please drag with one finger.
Zoom: To zoom in or out, please scroll with the mouse wheel or on a touch screen please work with pinch-to-zoom i.e. pull the object apart with 2 fingers to zoom in.
Move the entire object: Hold right-click and drag or on a touchscreen please drag with 2 fingers.
Project into my own space:
Click AR (Augmented Reality) at the bottom right of the window. Now you can scan the QR code or simply open the link on your mobile device.
100 - 240 V AC, 50 / 60 Hz
1250 W per channel
20 Hz - 20 kHz (±3 dB)
≤ 0.15 %
|Power / current consumption||
1100 W (at 2/3 rated output, 8Ω/CH)
100 dB(A) (or more)
CH 1-2 : 20kΩ (balanced) / 10kΩ (unbalanced), 0.775/1/40 V (0/2/32 dBu), XLR-F connector
2x 700 W (8Ω, 40 ms), 2x 1250 W (4Ω, 20 ms)
Bridge mode: 1x 2500W (8Ω, 20 ms)
NL4 SPEAKON connector
|Number of channels||
LED : Protect (red)/ Clip (red)/ -5dB(green) / -10dB(green) / -20dB(green) / Signal(green) / Power(green)
0℃~+35℃ (32℉ to 95℉)
80% RH or less (no condensation)
483 x 89 x 306 mm (W x H x D)
Steel plate, paint, black
The dual-channel power amplifier shall use digital class-D circuit topology and shall be configurable to allow two channel operation. Power output in two-channel mode with all channels driven shall be: 1250W per channel into 4 ohms and 700W per channel into 8 ohms. The channels shall be bridgeable to produce 2500 W into 8 ohms. Total harmonic distortion (THD) shall be less than 0.15% (1kHz). The frequency response shall be 20 to 20,000 Hz (+/-3dB). The signal to noise ratio shall be over 100 dB (A-weighted). The input impedance shall be 20k ohms for each input into an balanced input circuit and 10k ohms for unbalanced input circuit. A rear panel switch shall allow selection of bridged, parallel or stereo operation. A rear panel switch shall allow selection of 0.775V, 1V or 32dB sensitivity. Each input shall feature an XLR-F connector and an XLR-M connector to link the source. Rear panel output connector shall be NL4 Speakon. The front panel attenuators shall be taper potentiometer. The front panel shall have two LED indicators with 7 LEDs each to indicate the following conditions: Power, Signal, -20 dB, -10dB, -5dB, Clip and protection circuit activation. The front panel shall have an I/O switch. The front panel shall also have two removable air filters that may be removed for cleaning without removing the amplifier from the rack. The amplifier shall be forced-air fan cooled with the air intake at the front and exhaust at the rear.
Power consumption shall be 1100 W ( 2/3 rated, 8 ohms per channel).The amplifier shall use only two standard rack-space or 89 mm and its dimensions shall be 483 (W) x 89 (H) x 305 (D) mm. Front panel and case finish shall be black plated steel sheet. Weight shall be 6.4 kg.
The amplifier shall be a TOA model DA-1250D.