CP-9500M2

Digital Mixer Amplifer

The CP-9500M2 is a compact solution for houses of worship, gymnasiums or auditoriums, where sufficiently high power is required. It is designed for fixed installations with 100-volt loudspeakers.

The two digital power amplifiers are quite efficient and consume less power than an equivalent analogue amplifier. The number of inputs and outputs can be expanded with optional modules, depending on the application.

  • CP-9500M2: 2x 500 W (100 V line)
  • Low power consumption due to efficient digital power amplifiers
  • Expansion of the number of inputs and outputs with optional modules, depending on the application




  • Specifications
  • Application examples
  • Equipment
  • Downloads
Specifications
Specifications for product:
CP-9500M2 M-9000M2
Power source

220 - 240 V AC, 50 / 60 Hz

220 - 240 V AC, 50 / 60 Hz

Rated output

500 W (x2)

Frequency response

20 Hz - 20 kHz (+1 / -3 dB)

20 Hz - 20 kHz (+1 / -3 dB)

Distortion

< 0.3 %

< 0.008 %

Power consumption

253 W (1/8 rated power)

40 W

Speaker output

100 V, 500 W, 20 Ω, Connector: screw terminal

Amplifier

Class D

S/N ratio

85 dB (20 Hz-20 kHz, all tone controls flat, output volume minimum)

90 dB

Number of channels

8

Connectable microphones

8

Inputs

2, max. 8 (with optional modules)

Audio input: Max. 8 channels, modular (modules optional)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: 1mA or less, removable terminal block (14 pins)

Control input

RS-232C, D-sub connector (9P, female), for PC setting or control by AMX, Crestron etc.;
Control input: 4, no-voltage make contact, open voltage: 3.3 V DC, short-circuit current: 1 mA or less, removable terminal block (14 pins); 2 remote volume control by potentiometer 10 kΩ

Outputs

Speaker Outputs 2,
Mix outputs (with optional module T-001T): max. 3 modules, 2 channels each: +20 dBV (in 10 kΩ), 600 Ohm, balanced

Audio output: Preamplifier outputs 1 and 2: 0 dBV, 600 Ω, balanced, removable terminal blocks (3-pins), max. 8 outputs
Control output: 4 outputs, open collector output, withstand voltage: 27V DC,control current: 50mA, removable terminal block (14 pins)

Control output

4, open collector output, withstand voltage: 27 V DC, control current: 50 mA, removable terminal block (14 pins)

Operating humidity

35% to 80%

35 % to 80 % RH (no condensation)

Finish

Aluminium, Steel plate, hairline, black

Aluminium, black

Dimensions

420 x 107.6 x 415 mm (W x H x D)

420 x 107.6 x 353 mm (W x H x D)

Weight

9.6 kg

6 kg

Accessory (included)

Power

cord (EUR/UK) x 2, rack mounting bracket x 2, bracket mounting screw (M4x16) x 4,

removable terminal plug (3-pins) x 2, removable terminal plug (14 pins) x 1, CD-ROM

x 1, start guide x 1, terminal block cover x 4, terminal block cover mounting screw

(M4x8) x 2

Power cord (2 m) x 1, Rack mounting bracket x 2, Bracket mounting screw x 4, Blank panel x 7, Blank panel mounting screw x 14, Removable terminal plug (3 pins) x 2, Removable terminal plug (14 pins) x 1, CD x 1

Indicator

Alpha-numeric (szene name, parameter value ...), communication, fault, 12x 3-colour bargraph for input and output levels/fader set, channel on

Crosstalk

64 dB or more (at 20 kHz)

A/D, D/A Converter

24 bit ΔΣ DAC

Controls

Input channel selection, volume control and on/off switch; output channel selection, volume control and on/off switch; memory/utility button with parameter knob; enter/back button; up/down/left/right buttons; power

Equalizer / Filter

Tone control (bass, treble: ±12 dB), 10 parametric equalizers (±12 dB, 20-20000 Hz, Q: 0,3 ... 5), 10 speaker equalizer presets (30 with software), high & low pass (12 dB/oct, 20-20000 Hz each)

Compressor

5 presets (optimised for different applications)

Delay

0 ... 40 ms

Matrix

8 x 8

Other features

32 scenes (storable settings); key lock

PC software

inclusive

Operating temperature

-10 °C to +40 °C

Application examples
Equipment
Downloads