Digital Matrix Mixer
The NEW TOA M-9000M2 Digital Matrix Mixer redefines the mixer category, by combining a modular matrix mixer and digital signal processor (DSP) in a compact two-rack package. This versatile new modular unit is ideal for multi-zone paging, music distribution and room-combining applications.
The M-9000M2 combines an enhanced GUI programming interface with exceptional audio quality.
The M-9000M2 enables easily configured custom systems with up to eight mic/line inputs and eight outputs. The M-9000M2 has two output channels with built-in DSP, including ten-band parametric EQ, compressor, delay, and more.
Input and output modules include additional DSP. A new integrated operating mode provides powerful functionality for both simple mixing and complex multi-zone paging applications. Features include telephone zone paging, automatic microphone mixing and ambient noise control.
|Power Source||AC Mains, 50/60Hz|
|Audio Input||Max. 8 channels, modular construction (modules optional)|
|Audio Output||Preamplifier output 1, 2: 0dB*, 600Ω, balanced, removable terminal block (3 pins)|
|Module Slot|| Analog input (slot 1 - 8): -10dB*, 10kΩ, unbalanced
Digital input (slot 1 ÔÇô 4): 24 bit/48kHz
MIX output (slot 1 ÔÇô 8); -14dB*, 330Ω (CH 1 prefader output), unbalanced
Digital output (slot 5 ÔÇô 7): 24 bit/48kHz
Power supply (slot 1 ÔÇô 8); +24V, -24V, +6V DC
|Frequency Response||20Hz ÔÇô 20kHz +1, -3dB|
|Total Harmonic Distortion||0.008% (@22kHz LPF, 1kHz, +10 dB* output)|
|S/N Ratio|| At input short, 20Hz ÔÇô 20kHz, ALL FLAT or OFF setting
Output volume min.: 90dB
Output volume max.: 61dB (input 1 vol.: 0dB,other inputs:OFF)
|Crosstalk||64dB or more (at 20kHz)|
|Tone Control||Bass: +/-12dB (at 100Hz), Treble: +/-12dB (at 10kHz)|
|Parametric EQ||10 bands, Freq: 20Hz ÔÇô 20kHz, 31 points, Variable range: +/- 12dB, Q: 0.3 ÔÇô 5|
|Speaker Equalizer||10 (setup software has 30 TOA speaker presets)|
|High-pass Filter||-12dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps|
|Low-pass Filter||-12dB/oct, Variable frequency range: 20Hz - 20kHz, 31 steps|
|Compressor||Depth: 1 ÔÇô 5|
|Delay||0 ÔÇô 40 ms (1 ms steps), maximum 40 ms (CH1 + CH2)|
|Auxiliary Function||Key lock function|
|Control Input/Output|| RS-232C*2, D-sub connector (9P, female)
Control input: 4 inputs, no-voltage make contact input, open voltage: 3.3V DC, short-circuit current: 1mA or less,removable terminal block (14 pins)
Control output: 4 outputs, open collector output, withstand voltage: 27V DC,control current: 50mA, removable terminal block (14 pins)
Remote volume: 2 channels, connect a10kΩ/linear taper variable resistor or input the DC voltage of 0 to 10V, removable terminal block (14 pins)
|Operating Temperature||-10┬░ to 40┬░C (14┬░ to 104┬░F)|
|Operating Humidity||35% to 80% RH (no condensation)|
|Finish||Panel: aluminum, hair-line, black; Case: surface-treated steel plate, black paint|
|Dimensions||(W ├ù H ├ù D) 420 ├ù 107.6 ├ù 353mm (16.54" ├ù 4.24" ├ù13.9")|
|Weight||6 kg (13.23 lbs.)|
|Acessories|| Blank panel...7, Blank panel mounting screws....14
Removable terminal plug(3pins)...2
Renovable terminal plug (14 pins)...1, CD...1
(*2) Allowing it to be controlled by a control system such as AMX and Crestron through RS-232C port
The AN-001T is a plug-in module of 2-channel ambient noise detector designed for use with the M-9000.
It automatically adjusts the output volume in response to the change of ambient noise level. The AN-001T can handle input signals from microphone level (-60dB) to line level (-10dB) by controlling the gain in 9 steps. Phantom power (+24V) can be supplied for condenser microphone use.
The AN-9001 is an electret condenser microphone designed for ambient
noise sensing. It is used in conjunction with the AN-001T Ambient Noise control module in the M-9000. It can be mounted in an American Standard 1-gang electrical box in the ceiling or wall.
The C-001T is Control I/O expansion module designed for use with the M-9000 and can provide up to 8 channels each of input and output expansion. Since the main unit has 4 preinstalled inputs and outputs each, the control input and output can be expanded to up to 12 channels each when the C-001T is used.
The D-001R is a line input plug-in module designed for use with the 9000 Series amplifiers. It has 2-channel unbalanced inputs of RCA jacks. Input signals to both channels are mixed together. The D-001R can process effect for TONE/EQ/COMPRESSOR to two inputs independently.
The D-001T is a plug-in module designed for use with the M-9000 and can provide two independent balanced inputs. The D-001T can handle signals ranging from microphone level to line level by controlling their input sensitivity in 9 increments from -60dB to -10dB. Phantom power (+24V) can be supplied for condenser microphone use. The D-001T can process effect for TONE/EQ/COMPRESSOR to two inputs independently.
The T-001T is a plug-in module designed for use with the M-9000 and provide two independent balanced outputs. It can drive load of 600Ω up to +16dB. It can process effect for TONE/EQ/ COMPRESSOR to two inputs independently.
The ZM-9003 is a remote control switch panel with 4 interlocking selection switches and 2 momentary switches. Connecting it to the 9000 series amplifier's control input terminal permits various controls such as BGM source selection and the sound volume adjustment. It can be mounted in an American standard 2-gang electrical box in the wall.
Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9011 is a wall mounted remote control panel having 4 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 1-gang electrical box in the wall.
Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9012 is a wall mounted remote control panel having a volume control knob. It is used in conjunction with the RC-001T Remote control module. The volume control knob can be set on which channel of input or output to adjust volume level. It can be mounted in an American standard 1-gang electrical box in the wall.
Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9013 is a wall mounted remote control panel having 8 buttons. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons. It can be mounted in an American standard 2-gang electrical box in the wall.
Designed for exclusive use with the 9000M2 Series amplifier, the ZM-9014 is a wall mounted remote control panel having 4 buttons and 1 volume control knob. It is used in conjunction with the RC-001T Remote control module. Scene switching and paging ON/OFF functions can be assigned to the buttons, and input or output channel's volume adjustment to the volume control knob. It can be mounted in an American standard 2-gang electrical box in the wall.
The ZP-001T is a zone paging module designed for use with the M-9000
and functions as interface to connect the M-9000 to an analog PABX,
allowing zone paging to be initiated from the PABX. There are two operation modes: ring signal and paging port modes. Broadcast can be initiated regardless of operation mode.
NOM (Number of Open Microphones) - automatically adjusts output level based on the total number of open microphones.Ducker function (Auto-Mute function) - automatically works to attenuate outputs of channels with low priority.
Highly effective feedback suppression.
The D-2000 Series provides feedback elimination for up to 4 channels.
In addition, each channel can control 12 problem frequencies. This
makes it convenient for feedback suppression in different areas of the
same hall. 2 versatile suppression modes.Either presettable Auto Mode or realtime Dynamic Mode can be selected to suit the situation and eliminate feedback.
Essential audio processing
Delay, High-, Low-Pass and Notch Filters, Parametric Equalizers, Compressor/Auto Leveller, Gate, Crossovers and Crosspoint Gain.
32 preset memories for user convenience.
Up to 32 different routing and parameter configurations can be stored in memory and called up to handle venues such as multi-purpose halls
and conference rooms that require frequent changes in staging,seating and speaker arrangements.
The dedicated softwareÔÇÖs graphic, visually attractive user interface
helps streamline settings and adjustments.
Mixing console option
The D-2008SP can be connected via network to the D-2012C mixing console with 12 motorized faders and 8 rotary encoders. This enables simplified mixing operation that suit non-professional users. Using the D-2012C, allows input and output channel signal levels to be monitored,volume changes made as well as recalling preset memory settings, and contact control.
D-2000 Series units used in conjunction with the optional D-911 VCA
Fader Unit provides more of an analog mixer user interface.
The RS-232C port allows external control when connected to external
devices such as AMX*1 and Crestron*2 control units. This also allows full control over venue lighting and power curtains (blackout) from a central remote location. This feature is particularly suited for AV presentation rooms, conference rooms and hotel banquet rooms.