Page of 3
Supplier 
Per Page

Wired Microphones

Wired Microphones
Flush-Mount Boundary Microphone

ΤΗσ Ideal for conference room recording and security monitoring.
ΤΗσ Electret condenser microphone element with omnidirectional pattern for comprehensive pickup.
ΤΗσ Unobtrusive design allows easy flush-mounting in walls, ceilings, and desktops.
ΤΗσ Optimized to deliver best performance when used on a desk or attached to a ceiling.
ΤΗσ Two rubber isolation rings are provided as an accessory serving to reduce vibration.
ΤΗσ Wide frequency range of 30 ΤΗτ 20 kHz provides wellbalanced sound with clarity and a satisfying tonal response.
ΤΗσ Phantom power range of 9 to 52 volts enhances operational versatility.


Boundary Microphone

ΤΗσ Ideal for speech and recording applications at meetings, lectures, and religious services.
ΤΗσ Electret condenser microphone element with cardioid pattern for focused pickup.
ΤΗσ Design, optimized to deliver best performance when used on a desk.
ΤΗσ Slim, stylish design suits interior decor.
ΤΗσ Rejection of undesirable off-axis sound minimizes possible feedback.
ΤΗσ Low-cut filter switch prevents interference from ambient noise from being picked up.
ΤΗσ Wide frequency range of 35 ΤΗτ 20 kHz provides wellbalanced sound with clarity and a satisfying tonal response.
ΤΗσ Phantom power range of 9 to 52 volts enhances operational versatility.


Gooseneck Microphone

ΤΗσ Ideal for such speech applications as meetings, lectures, and religious services.
ΤΗσ Electret condenser microphone element with cardioid pattern for focused pickup.
ΤΗσ Excellent high-frequency response of 60 ΤΗτ 20k Hz delivers clear output even through a PA system.
ΤΗσ High sensitivity (ΤΗτ35dB) provides a satisfying tonal response.
ΤΗσ Gooseneck with two adjustment points allows more flexible microphone positioning angles.
ΤΗσ Rejection of undesirable off-axis sound minimizes possible feedback.
ΤΗσ Phantom power range of 9 to 52 volts enhances operational versatility

Picture shows EM-800 with optional stand ST-800


Lavali?Ώre Microphone

  • Ideal for voice-oriented applications such as lectures, presentations and religious services.
  • Compact electret condenser microphone element with hypercardioid pattern for highly focused pickup.
  • Designed for best performance when attached to the chest area.
  • The cable holder minimizes noise from cable and clothes rustling.
  • Capsule rotates 360 degrees, for optimal pickup even when worn on a lapel.
  • Phantom power range of 9 to 52 volts enhances operational versatility.

Microphone, Unidirectional

  • Moving coil microphone for hand-held speech use applications.
  • Rigid diecast aluminium body.
  • Switching and handling noise suppression.
  • 600 Ω impedance and -55dB sensitivity.
  • Fitted with 7.5m phone plug cable.
  • Short-off type slide ON / OFF switch.
  • Microphone holder provided as standard accessory.

Microphone, Unidirectional

  • Moving coil microphone for hand-held speech use applications.
  • Rigid diecast zinc body.
  • Switching and handling noise suppression.
  • 600 Ω impedance and -55dB sensitivity.
  • 10m XLR-phone plug supplied with unit.
  • Short-off type slide ON / OFF switch.
  • Microphone holder provided as standard accessory.

Microphone, Unidirectional

  • Moving coil microphone for hand-held speech use applications.
  • Rigid diecast zinc body.
  • Switching and handling noise suppression.
  • 600 Ω impedance and -55dB sensitivity.
  • 10m 5 pin DIN plug supplied with unit.
  • Short-off type slide ON / OFF switch.
  • Microphone holder provided as standard accessory.

Microphone, Unidirectional

  • Moving coil microphone for hand-held vocal / speech use applications.
  • Rigid diecast zinc body.
  • Switching and handling noise suppression.
  • 600 Ω impedance and -54dB sensitivity.
  • 10m XLR-phone plug supplied with unit.
  • Short-off type slide ON / OFF switch.
  • Microphone holder provided as standard accessory

DM-1500 Unidirectional Microphone

  • Moving-coil microphone for hand-held, vocal use applications.
  • Rigid diecast zinc microphone body.
  • Switching and handling noise suppression.
  • 600 Ω impedance and -56dB sensitivity.
  • 10m XLR-phone plug cable supplied with unit.
  • Short-off type slide ON/OFF switch.
  • Microphone holder provided as standard accessory

Microphone, Stand Mount, Lo-Z, Gooseneck

  • Unidirectional stand mount type with flexible gooseneck.
  • 600 Ω impedance.
  • Handling noise suppressed.
Page of 3
Sign up as a Member now!
Exhibition Roster

See which exhibitions we'll be at next by Clicking Here!

Please upgrade to the latest version of Flash Player.

Click here if you already have Flash Player installed.